30A 360W 12V DC Power Supply, Universal Reguled Switching AC 110V/220V to DC Converter (SMPS) Transformator Driver Adaptor pentru LED Lights, CCTV Camera System, 3D Printer, Radio, Computer Project
5 sold in last 24 hours
- 1.Stabilirea 12V 30A 360W DC Pârtie Proiectat pentru conversia consistentă a energiei de la AC 110V/220V, asigurând o performanță bună și unda redusă pentru electronice sensibile, cum ar fi iluminatul cu LED-uri, camerele de supraveghere și sistemele de comunicații.
- 2.Dual Tensiune Desktop Design Un comutator de tensiune montat lateral vă permite să alegeți manual setarea corectă înainte de alimentarea. Pentru regiunile americane, unitatea este stabilită la 110V pentru comoditate. Compatibilitatea de înaltă tensiune face ca acest SMPS să fie ideal atât pentru aplicaţiile interne, cât şi pentru cele industriale.
- 3.Performanta eficienta, eficienta si fiabila: Construita cu scurtcircuit, suprasarcină, supratensiune si protectii la supratemperatura pentru a proteja echipamentele conectate. Caracteristicile unui filtru EMI/RFI pentru producția de zgomot redus, incinta de disipare a căldurii metalice pentru o răcire îmbunătățită și o testare de ardere completă 100% pentru a asigura fiabilitatea și durabilitatea în utilizarea pe termen lung.
- 4. Aplicatii Versatile Peste Multiple Dispozitive: O sursa universala de energie pentru o gama larga de sisteme alimentate cu curent continuu, incluzand lumini cu benzi LED, camere CCTV, imprimante 3D, transmitatoare radio, sisteme de control al comunicatiilor si proiecte de automatizare industriala. Potrivit pentru ateliere, laboratoare, și DIY electronice în cazul în care puterea constantă DC este necesară.
- 5. Asigurarea calitatii si asistenta clientilor: fabricata de o fabrica certificata ISO cu peste 15 ani de experienta in domeniul electronicii electrice. Noi stăm în spatele fiecărui produs cu control strict al calității și suport tehnic receptiv. Satisfactia dumneavoastra este garantata pana la noi oricand pentru asistenta profesionala sau inlocuirea produsului, daca este necesar.
Estimated shipping
Select a product to estimate shipping.This 12V 30A 360W regulated switching power supply provides stable DC output for a variety of electronic and industrial applications. It efficiently converts AC 110V or 220V to DC 12V, delivering steady current and low ripple output. The durable perforated metal housing enhances cooling and ensures reliable long-term operation. Perfect for LED lighting, CCTV systems, 3D printers, communication devices, and DIY electronics.
Technical Specifications
- Input Voltage: AC 110V / 220V ±15%, 50/60Hz
- Output Voltage: DC 12V (adjustable ±10%)
- Maximum Output Current: 30A
- Rated Power: 360W
- Connection Terminals: +V x2, -V x2
- Operating Temperature: -15°C to +55°C
- Humidity Range: 10%–95% RH (non-condensing)
- Material: Galvanized metal shell with multiple ventilation holes for heat dissipation
- Certifications: CE / FCC / RoHS / CCC compliant
Performance and Safety
Equipped with short circuit, overload, over-voltage, and over-temperature protection to safeguard connected devices. Features a low noise EMI/RFI filter for stable output and full-load burn-in testing for quality assurance. The heavy-duty case minimizes temperature rise and improves durability. Consistent voltage is maintained during power-on and operation.
Important Usage and Safety Instructions
Please follow these guidelines carefully to ensure reliable and long-term performance of your 12V power supply.
1. Ventilation and Operating Conditions:Operate the unit in a dry, well-ventilated environment. Avoid sealed spaces or placing objects on top that could block airflow. Continuous heat buildup can reduce efficiency and shorten lifespan.
2. Voltage Configuration:The power supply is factory-set to 110V/115V for U.S. regions. If operating on 220V AC, move the selector switch to the correct position before powering on. Always verify input voltage to prevent internal component failure.
3. Load Management:For optimal efficiency, operate the device between 70–80% of its rated current. Overloading or prolonged use at full capacity may cause overheating or premature aging of internal parts.
4. Wiring and Grounding:Confirm that all terminals are securely connected and polarity is correct before applying power. Use appropriate cable thickness for your load. Proper grounding is required for electrical safety and noise suppression.
5. Maintenance and Inspection:Inspect the unit periodically. Clean vents with compressed air or a soft brush depending on the dust level in your environment—typically every 2–3 months. Check terminals for looseness or corrosion to maintain stable contact.
6. Environmental Cautions:Use indoors only, away from moisture, condensation, or high humidity areas. Do not install near water sources or in corrosive environments. In areas with unstable mains power, consider using a UPS or voltage stabilizer.
7. Radio Frequency Considerations:This unit includes an EMI/RFI filter to minimize interference. However, it is not intended for direct use with sensitive radio transmitters or amateur radio equipment where noise isolation is critical.
8. Safety Warnings:High voltage exists inside the housing—do not remove the cover or attempt to repair internally. If unusual sounds, heat, or odor occur, disconnect power immediately. Installation should be performed by a qualified electrician. The package does not include cables, switches, or screws; please prepare them as needed.
Application Fields
Ideal for powering LED strip lights, display signs, CCTV camera systems, 3D printers, automation controllers, and communication equipment. Suitable for both home and industrial environments requiring a stable 12V DC power source.
Quality and Service Commitment
Manufactured under strict quality control by a professional OEM factory with over 15 years of experience. Every unit is tested before shipment. We offer responsive technical support and customer satisfaction guarantee — delivering reliable performance and trusted service worldwide.
| Main Specification | |
|---|---|
| Producătorul | GESD |
| Specificații Met | RoHS |
| Amperage | 30 A |
| wattage de ieșire | 360 wați |
| Tensiune de ieșire | 12 volți of direct curent |
| Marca | GESD |
| UPC | 768432200107 791523250569 755454564928 |
| Numărul de elemente | 1 |
| Tensiune de intrare | 220 volți of alternant curent |
| Curent de ieșire | 30 A |
| Material | Metal |
| Culoare | Alb |
| Factor de formă | Rectangulare |
| Tip conector | șurub |
| Product information | |
| Puterea maximă | 360 wați |
| Item details | |
| Număr model | 12v 30a |
| Measurements | |
| Dimensiuni elemente | 4, 5 x 8, 5 x 1, 97 inci |
| Others | |
| Tip de produs | Convertoare de putere |
| Material de blocare | Metal |
| Numărul părții Mfr | 12v 30a |
| Tip conector utilizat pe cablu | șurub |