250PCS #10 x 1-1/2" Black Hex Head Self-Drilling Metal Roofing Screws
4 sold in last 24 hours
- 【#10 x 1-1/2” Roofing Screw】 JEGONFRI roofing screws are designed to fix thin-gauge metal plates under 2.4 mm to wooden structures. Composed of high-strength alloy steel to provide strong toughness. An additional magnetic-absorbing driver bit available.
- 【Convenient to Use】 The self-drilling point can reduce metal shaving. Galvanized ASD coarse thread with moderate corrosion resistance is applied to wood. Mainly used for most iron panel, steel plate, aluminum panel, wood, plastic sheet, composite board, etc.
- 【EPDM Washer】 The 1/2"(13.8 mm) rubber washers expand under pressure to form a durable weather-tight seal. And the suitable diameter tightly covers screw hole.
- 【Black Hex Head】 The process of baking varnish provides superior corrosion resistance and exterior protection for 5/16" hex head with high-torque drive when installed. Jet black matches popular roofing colors.
- 【Warm Tips ! 】 Since the coarse thread and small head of screw, it is not suitable for thick metal plate exceeding 2.4mm and the connection between the metal plates! Ensure holding angle to prevent sliding when use. 250 pieces per retail package, a cost-effective choice for job.
Tags |
Estimated shipping
Select a product to estimate shipping.How can I get the best starting position on smooth metal panels?
Start slowly under 1500 RPM, keep the screw vertical, and apply steady pressure. For very smooth panels, make a small dimple first to help the drill point stay in place.
What projects are these roofing screws recommended for?
They are recommended for thin metal roofing or siding panels attached to wood. Great for DIY roof repair, sheds, barns, garden buildings, and outdoor projects.
How do I create a good weather-tight seal with the EPDM washer?
Keep the screw at 90° and drive until the EPDM washer is snug and slightly compressed. Proper pressure helps seal the hole without over-flattening the washer.
Why choose self-drilling roofing screws instead of sharp-point screws?
Self-drilling screws drill through thin metal first, then fasten into wood. They help reduce pre-drilling and make metal-to-wood roofing installation easier.
Are these screws suitable for heavy-duty steel applications?
No, they are mainly for thin metal roofing or siding to wood. For heavy-duty steel or thick metal, use stronger screws made for that purpose.
| Main Specification | |
|---|---|
| Producătorul | JEGONFRI |
| Număr de unități | 1 Număr |
| Dimensiuni element L x W x H | 5.3 x 2.6 x 5.2 inches |
| Finisaj exterior | Zinc |
| Tip metalic | Oţel aliat |
| Stil cap | Hex |
| Acoperire filet | Complet filetate |
| Diametrul exterior | 0.19 inches |
| Marca | JEGONFRI |
| Tip de cap | Hex |
| Numărul de elemente | 250 |
| Tip de dispozitiv de fixare | Self-Drilling Screws |
| Diametru element | 0,19 inchi |
| Numărul de bucăți | 250 |
| Dimensiune dispozitiv de fixare | #10-1-1/2" |
| Dimensiune fir | #10-12 |
| Material | Oţel aliat |
| Culoare | Negru |
| Tip fir | Right Hand All-thread |
| Sistem de conducere | Hex extern |
| Product information | |
| Setează numele | Hex Head Self-Drilling Metal Roofing Screws |
| Technical Details | |
| Numărul părții | WG-3770 |
| Model | WG-3770 |
| Tip material | Oţel aliat |
| Stil filet | Mâna stângă |
| Clasa firului | Vrăjitoare |
| Diametru compact Groove | 0.19 inches |
| Setează tipul filetului cu șurub | All-Thread |
| Style | |
| Tipuri de finisare | Pulbere acoperită |
| Measurements | |
| Dimensiuni elemente | 5.3 x 2.6 x 5.2 inches |
| Others | |
| Comment | Rezistentă la rugină or EPDM Washer Stops Leaks or No Pre-Drill Needed or Hex Bit Included or for Metal or Wood |
| Tip de produs | Sheet Metal Screws |
| Evaluare grad | Premium |
| Nume dimensiune | 1-1/2 in |
| Șurub stil cap | Hex |
| Șurub stil punct | Self-Drilling Point |