CONFAST 1/4" x 2-1/2" Hammer Drive Nail in Anchor (100 per Box)
8 sold in last 24 hours
- INSTALLS INTO A VARIETY OF BASE MATERIALS-Can be used in a variety of applications making job easier and faster
- ANCHOR DIAMETER EQUALS HOLE DIAMETER-Makes it easy to determine hole size
- ALL SIZES PACKAGED 100 PIECES PER BOX-Quantity makes it easier to purchase and use
- PERMANENT FASTENING-Once installed, fastener cannot be removed, very secure
Tags |
Estimated shipping
Select a product to estimate shipping.Applications
The anchor is made from ZAMAC. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 2-1/2"
Minimum Embedment
The minimum anchor embedment into the concrete is 3/4". Therefore, the anchor must be installed so that a minimum of 3/4" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
| Main Specification | |
|---|---|
| Producătorul | CONFAST |
| Număr de unități | 100 Număr |
| Dimensiuni element L x W x H | 0.19 x 0.88 x 0.88 inches |
| Diametrul exterior | 0,25 inci |
| Marca | Confast |
| UPC | 820274000632 |
| Numărul de elemente | 100 |
| Tip de dispozitiv de fixare | Hammer-In |
| Diametru element | 0,25 inci |
| Numărul de bucăți | 100 |
| Dimensiune fir | 1/4-RM |
| Material | Zamac |
| Culoare | Argint |
| Dimensiune | 1/4" x 2- 1/2" |
| Product information | |
| Setează numele | Set 100-piece |
| Technical Details | |
| Numărul părții | HD14212 |
| Model | HD14212 |
| Tip material | Zamac |
| Diametru compact Groove | 0,25 inci |
| Puterea maximă de forfecare | 450 |
| Style | |
| Tipuri de finisare | Zinc |
| Measurements | |
| Dimensiuni elemente | 0.19 x 0.88 x 0.88 inches |
| Others | |
| Tip de produs | Drive Anchors |
| Forma elementului | Block |
| Nume dimensiune | 1/4" x 2- 1/2" |
| Șurub stil cap | Mushroom |